PTFE Coated Glass Mesh GM-95-NA

£8.57
In Stock
EAN: 620947466846

GM-95-NA is a 4mm square aperture PTFE coated mesh. Ideal for use as a finished conveyor belt when used for drying and curing inks on screen printed products such as point of display and t-shirts. We can manufacture any belt size up to 5200mm wide and to your required length. 4000mm wide is our general stock width

Supplied by the metre
 Back to: PTFE Coated Mesh
1-2d.gif
Applications
PTFE mesh belts are used in applications such as the drying of printed products for example; point of display stands, T-shirts, glass and mass produced paper prints. Print dryers usually opt for Ultra violet, Infra red or hot air as the heat source to dry.

Other applications range from the drying of cereals, non woven’s, charcoal interlinings, carpet & carpet tiles, printed circuit boards and shrink-wrap tunnels but to name a few.
Features and Benefits
PTFE open mesh conveyor belting is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace.
Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money.
This material can be offered in carbon loaded black therefore providing antistatic properties.
Material Properties
• High temperature resistant - up to 260°C• Excellent release properties• Exceptional chemical resistance
Available in widths up to 5200mm, manufactured in various thicknesses and weights
If your requirements are not available to purchase online please contact our sales team on +44 (0)1422 366386
Specification
• Reference: GM-95-NA (4x4) • Colours: Brown / Black
• Standard width: 3600mm • Tensile strength: 3800 N/5cm
• Thickness: 0.95mm • Temperature resistance: 260°C
• Weight: 460g/m2